Difference between revisions of "Projets-2015-2016-Sonotone-SRS"

From air
Jump to navigation Jump to search
Line 86: Line 86:
   
 
==3.1 Requirement X.Y.Z (in Structured Natural Language)==
 
==3.1 Requirement X.Y.Z (in Structured Natural Language)==
'''Function''': Amplifying sounds to enable people who hace hearing problems to hear properly
+
'''Function''': Amplifying sounds to enable people who have hearing problems to hear properly
   
 
'''Description''': The sonotone captures any sound and aplifies the wanted frequencies with the adapted gain
 
'''Description''': The sonotone captures any sound and aplifies the wanted frequencies with the adapted gain
Line 99: Line 99:
   
 
'''Action''':
 
'''Action''':
  +
* Signal processing of the sound that comes in. Apply the needed filters to the sound with python modules so that the sound coming out is audible by the partially deaf user
*
 
  +
* Sets the adequate filters with the initial settings to be able to do live processing
   
 
'''Non functional requirements''':
 
'''Non functional requirements''':
  +
* Easy to use : friendly interface
  +
* Relatively cheap : has to be less expensive than the hearing aid specialist consultation
   
 
'''Pre-condition''':
 
'''Pre-condition''':

Revision as of 14:46, 21 March 2016

The document provides a template of the Software Requirements Specification (SRS). It is inspired of the IEEE/ANSI 830-1998 Standard.


Read first:

Document History
Version Date Authors Description Validator Validation Date
0.1.0 January 18, 2016 HATTINGUAIS Julian, LECORPS Germain, VOUTAT Manuel Creation of the document TBC TBC


1. Introduction

1.1 Purpose of the requirements document

The Software Requirements Specification (SRS) is a document describing the software system of our project: Sonotone adjustable by its user. It describes how the system is supposed to work with functional and non functional requirements.

1.2 Scope of the product

The Hearing aid is a technology well-knowned and well-used to correct impaired hearing. Designed to amplify sound for the wearer, this type of device requires a large amount of knowledge in signal process, electronics , software development and about the functionning of a human ear. For this project, we only focused on the software aspect.

The main problem when someone acquire a hearing aid is that you need to see a audioprothésis. The time and the money you will spend in a sonotone is not related to the technology but to the adjustements of the prosthesis.

The main goal of this project is to allow any user to adjust his hearing aid by himself. This will be made by our software which allows to simply modify the frequences heard with an equalizer.

1.3 Definitions, acronyms and abbreviations

Hearing aid / Sonotone : an electroacoustic device which is designed to amplify sound for the wearer

Hard of hearing person : A person whoch is partially deaf.

1.4 References

Wikipedia : https://en.wikipedia.org/wiki/Hearing_aid

1.5 Overview of the remainder of the document

2. General description

2.1 Product perspective

The main aim of the project is to provide a new type of software in hearing aids. The software will allow partially deaf people to adjust their sonotone themsleves.

2.2 Product functions

Apply differents filters on surrounding sound

Apply a gain on differents range of frequency

Use an audiogram to set the parameters of our software

2.3 User characteristics

The User is able to change the parameters of the filters apply on the surrounding sound

After making his audiogram's results, the user is able to set his hearing aid.

2.4 General constraints

We don't know precisely the hardware caracteristics of a hearing aid. Especially the speed of the processor, the microphone, the amplifier and how the sound is restituated.

2.5 Assumptions and dependencies

The Hardware part is composed of a small processor with a low calcul capacity. Our software has thereofore to be performant and well optimized.

3.Specific requirements, covering functional, non-functional and interface requirements

  • document external interfaces,
  • describe system functionality and performance
  • specify logical database requirements,
  • design constraints,
  • emergent system properties and quality characteristics.

3.1 Requirement X.Y.Z (in Structured Natural Language)

Function: Amplifying sounds to enable people who have hearing problems to hear properly

Description: The sonotone captures any sound and aplifies the wanted frequencies with the adapted gain

Inputs: Settings according to the person's audiogram

Source: Ambient noise (including people talking)

Outputs: Same ambient noise with given frequencies amplified

Destination: This device is designed to be used by patially deaf people to replace the cost of a hearing aid specialist

Action:

  • Signal processing of the sound that comes in. Apply the needed filters to the sound with python modules so that the sound coming out is audible by the partially deaf user
  • Sets the adequate filters with the initial settings to be able to do live processing

Non functional requirements:

  • Easy to use : friendly interface
  • Relatively cheap : has to be less expensive than the hearing aid specialist consultation

Pre-condition:

Post-condition:

Side-effects:

4. Product evolution

5. Appendices

6. Index