The document provides a template of the Software Requirements Specification (SRS). It is inspired of the IEEE/ANSI 830-1998 Standard.

Document History
	Version	Date	Authors	Description	Validator	Validation Date
	0.1.0	2018	CHANET Zoran - CHARLOT Servan	TBC	TBC	TBC

1. Introduction

1.1 Purpose of the requirements document

This Software Requirements Specification document explains the ins and outs of the Nucleo project, along with the requirements and specifications.

1.2 Scope of the product

This product is dedicated to whoever uses a Nucleo card and needs or want to remotely reprogram it.

As it is redistributable, this product may be used for personal or industrial use.

1.3 Definitions, acronyms and abbreviations

Nucleo : for this project, a STM32F446 Nucleo-64 card will be used

Arduino/Olimexino : for this project, an olimexino-328 will be used

Wifi : for this project, an esp8266ex (or an ESP1-12 WEMOS) chipset will be used

SRS : Software Requirements Specification

1.4 References

1.5 Overview of the remainder of the document

The remainder of this SRS clarifies the requirements of the Nucleo project.

2. General description

2.1 Product perspective

Redistributable software allowing to dynamically remotely reprogram a Nucleo card through Wifi with the use of an ESP card.

2.2 Product functions

Remotely reprogram a Nucleo card through Wifi with the use of an ESP card

2.3 User characteristics

Both personal and industrial use. The product may be useful for an user who would like to reprogram its Nucleo card from a near remote location (because it may be inaccessible for some reasons).

2.4 General constraints

- Security (not anyone should reprogram the card)

- Reliability (what happens if the connexion stops while sending the new software ?)

2.5 Assumptions and dependencies

It is needed to have an ESP8266EX plugged on a ST32F446 Nucleo (for the flashing purposes), and the computer who will send the binary through wifi.

3.Specific requirements, covering functional, non-functional and interface requirements

document external interfaces,
describe system functionality and performance
specify logical database requirements,
design constraints,
emergent system properties and quality characteristics.

3.1 Requirement | Reprogramming

Function: Reprogramming the Nucleo via Wifi

Description: Sending a compiled program to the Nucleo

Inputs: Binary file (compiled program)

Source: User

Outputs: None

Destination: The ESP then the Nucleo card

Action: Reprograms the Nucleo card

Natural language sentences (with MUST, MAY, SHALL)

The file sent MUST be a compiled program
The Nucleo card SHALL reprogram itself with the file (implying it has the proper software installed)
In case of malfunction, reset or shutdown during the transfer of the file, the Nucleo card MUST ignore the operation

Graphical Notations : UML diagram and Sequences diagram

Non functional requirements: None.

Pre-condition: The ESP must display its wifi network and the user must be connected to it.

Post-condition: None.

Side-effects: None.

4. Product evolution

An interesting evolution for the project could be the development of a simplified user interface to connect to the ESP and send the binary to it.

5. Appendices

SRS related documents used to establish this page:

RICM4 2017 2018 - Nucleo/ SRS

Contents