Wireless Bluetooth RS232 TTL Transceiver Module: Difference between revisions

From air
Jump to navigation Jump to search
No edit summary
No edit summary
Line 22: Line 22:
* AT Commands http://www.cutedigi.com/pub/Bluetooth/BMX_Bluetooth_quanxin.pdf
* AT Commands http://www.cutedigi.com/pub/Bluetooth/BMX_Bluetooth_quanxin.pdf
* Soudure http://picasaweb.google.com/Cellbots/BluetoothModule#
* Soudure http://picasaweb.google.com/Cellbots/BluetoothModule#
* Arduino
* Arduino http://www.arduino.cc/cgi-bin/yabb2/YaBB.pl?num=1256669791
** http://www.arduino.cc/cgi-bin/yabb2/YaBB.pl?num=1256669791
** http://www.dealextreme.com/forums/Default.dx/sku.80711~threadid.897457


[[Image:BTModule80711.jpg]]
[[Image:BTModule80711.jpg]]

Revision as of 05:33, 4 July 2011

http://www.dealextreme.com/p/wireless-bluetooth-rs232-ttl-transceiver-module-80711


  • Wireless Bluetooth RS232 TTL transceiver module
  • Allows your target device to both send and receive the TTL data via Bluetooth technology without connecting a serial cable to your computer
  • Easy to use and completely encapsulated
  • Chipset: CSR BC417143 http://www.csr.com/products/technology/bluetooth
  • Bluetooth V2.0
  • Working voltage: 3.3V
  • Current: pairing 20~30mA, connected 8mA
  • User defined Baud rate: 1200, 2400, 4800, 9600, 19200, 38400, 57600, and 115200
  • Default serial port setting: 9600, N, 8, 1
  • Password: 1234
  • Suitable for: mouse, keyboard, joystick; computers and peripherals; GPS receiver; instrument and industrial control

Dimensions: 1.06 in x 0.51 in x 0.04 in (2.7 cm x 1.3 cm x 0.1 cm) Weight: 0.18 oz (5 g)

Links

BTModule80711.jpg

Connections (pad with golden dot next to it is pin 1):

  • 1: TX (data out)
  • 2: RX (data in)
  • 11: RESET (connect to ground to reset, pullup-resistor of 10K recommended)
  • 12: VCC (3.3V)
  • 13: GND
  • 24: LED output (ON when there is a connection, BLINKS when there isn't).
Retrieved from "https://air.imag.fr/index.php?title=Wireless_Bluetooth_RS232_TTL_Transceiver_Module&oldid=2654"