Intel Galileo

From air
Jump to: navigation, search
Intel Galileo
Intel Galileo with Monster Moto Shield and Wild Thumper
Intel Galileo House Case
Intel Galileo House Case

Arduino-compatible board build on a x86 SoC by Intel.

http://arduino.cc/en/ArduinoCertified/IntelGalileo


Premiers sketches

  • Blink OK
  • AnalogReadSerial OK
  • MonsterMotoShield KO

Intel® Galileo Shields List

Notes de mise en route

"Quick Start Guide", Section 11

   If you want to use WiFi, you must follow these steps. The WiFi driver is not present in
   the Linux image in SPI flash because it is too large. The Linux SD image also includes
   ALSA, V4L2, python, SSH, node.js, and openCV.


Linux Python script from Arduino sketch

/*
This example uses Linux system calls to create a python script which writes
number 0-9 to a file, log.txt, one number per second. Then execute the 
python script in the background, and regularly read the contents of the logfile
in the sketch while the python script is updating it.
*/

char output[3];

void setup() {
  
  Serial.begin(115200);
  
  system("echo '#!/usr/bin/python' > myScript.py");
  system("echo 'import time' >> myScript.py");
  system("echo 'for i in range(10):' >> myScript.py");
  system("echo '    with open(\"log.txt\", \"w\") as fh:' >> myScript.py");
  system("echo '        fh.write(\"{0}\".format(i))' >> myScript.py");
  system("echo '    time.sleep(1)' >> myScript.py");
  system("chmod a+x myScript.py");
  system("./myScript.py &");     
}

void loop() {
  
  FILE *fp;
  fp = fopen("log.txt", "r");
  fgets(output, 2, fp);
  fclose(fp);
  Serial.println(output);
  delay(1000);
  
}


Accès via Telnet

// How to – Use Galileo Linux using an Ethernet cable and a home network Router(DHCP server)
// https://communities.intel.com/message/208564

void setup() {
    system("telnetd -l /bin/sh");
}

void loop() {
    system("ifconfig eth0 > /dev/ttyGS0");
    sleep(20);
}


$ telnet 192.168.1.2

Trying 192.168.1.2...
Connected to new-host-3.home.
Escape character is '^]'.

Poky 9.0 (Yocto Project 1.4 Reference Distro) 1.4.1 clanton

/ # ls
bin     dev     home    lib     mnt     proc    sbin    sys     usr
boot    etc     init    media   opt     root    sketch  tmp     var

/ # uname -a
Linux clanton 3.8.7-yocto-standard #1 Mon Sep 16 14:59:19 IST 2013 i586 GNU/Linux

/ # ifconfig eth0
eth0      Link encap:Ethernet  HWaddr 98:4F:EE:00:1B:23  
          inet addr:192.168.1.2  Bcast:192.168.1.255  Mask:255.255.255.0
          inet6 addr: fe80::9a4f:eeff:fe00:1b23/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:1479 errors:0 dropped:1 overruns:0 frame:0
          TX packets:286 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:114528 (111.8 KiB)  TX bytes:16432 (16.0 KiB)
          Interrupt:41 Base address:0x8000 


/ # cd sketch/
/sketch # ls
sketch.elf
/sketch # 


Accès SSH

Par defaut, la distribution fournie n'inclut pas de serveur SSH.

Pour y remedier, Intel met a disposition une image plus complete qui entre autre, en possède un: https://communities.intel.com/docs/DOC-22226 (LINUX IMAGE FOR SD for Intel Galileo)

Une fois telechargé, voir la section 11 du document "Quick Start Guide" pour mettre cette image sur une micro-SD.

Après avoir récupérer l'adresse IP via le programme décrit dans la section précédente, faire simplement un ssh root@adresse_ip pour se connecter a la carte

Programming GPIO From Linux

Ajout du Wifi

TODO http://www.malinov.com/Home/sergey-s-blog/intelgalileo-addingwifi

Projects @ AIR

Boitiers

Books

  • “Getting Started with Intel Galileo” by Matt Richardson (coming soon ! Jan 22, 2014)

Communities & Forums