Adafruit Feather 32u4 RFM95 LoRa Radio

From air
Revision as of 09:21, 18 January 2017 by Donsez (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
Adafruit Feather 32u4 RFM95 LoRa Radio

Arduino compatible board

  • Measures 2.0" x 0.9" x 0.28" (51mm x 23mm x 8mm) without headers soldered in
  • Light as a (large?) feather - 5.5 grams
  • ATmega32u4 @ 8MHz with 3.3V logic/power
  • 3.3V regulator with 500mA peak current output
  • USB native support, comes with USB bootloader and serial port debugging
  • GPIO : 8 x PWM pins, 10 x analog inputs
  • Built in 100mA lipoly charger with charging status indicator LED

Feather 32u4 LoRa Radio: RFM9x LoRa 868/915 MHz radio module.

  • SX1276 LoRa® based module with SPI interface
  • Packet radio with ready-to-go Arduino libraries
  • Uses the license-free ISM bands (ITU "Europe" @ 433MHz and ITU "Americas" @ 900MHz)
  • +5 to +20 dBm up to 100 mW Power Output Capability (power output selectable in software)
  • ~300uA during full sleep, ~120mA peak during +20dBm transmit, ~40mA during active radio listening.
  • Simple wire antenna or spot for uFL connector

Setup :

Arduino library

  • Install "Adafruit AVR boards by Adafruit" in the Tools > Boards > Boards Manager.

Projects @ AIR